Cary 10 Minute Water Heater Maintenance Check

Posted by on Feb 26, 2014 in Water Heater Repair Cary NC

We are going to put you to work today, but only for about 10 minutes. Yep, that’s all it will consider these 2 important water heater maintenance jobs; however, Water Heater Repair Cary NC knows they will do an outstanding job of assisting with 3 things:

  • Having your water heater last as long as possible (that will conserve you cash).
  • Seeing to it the water heater runs securely (we do not desire it to explode).
  • Having it run as energy efficiently as possible (also saving you money).

So with that in mind, are you prepared to spend 10 minutes once or two times a year to assist in saving some money? Hot Water Heater Repair Cary NC thought so.

Testing the T&P Relief Valve

Typically called the T&P Valve, or the temperature and pressure relief valve, has a crucial job. It helps make certain excess pressure does not develop inside the water storage tank, or in much more basic terms, it ensures the water heater does not blow up. As the photo reveals, it has a lever or little manage on it. All you have to do is raise it part method and afterwards release it. Hopefully, it snapped back to its shut position rapidly. If it is working correctly, a little water can be heard entering into the drain pipe below the lever you just lifted and you maybe heard some pressure being released. If none of these things have occurred during the test, the valve will should be changed.

As inspectapedia.com states: “dripping TP relief valves are unsafe. The hazard is that minerals in the water supply accumulate inside the valve during the passage of hot water through the valve assembly. That accumlation of scale will eventually block operation of the relief valve, causing the relief valve to fail to operate properly if unsafe pressure or temperature occurs in the water heater in the future. The risk, ultimately, is a water heater tank or heating boiler explosion.”  (read more…)

Carry out a Mimi Water Heater Tank Flush

By nature, rust and corrosion will take place inside the water storage tank thanks to the chemical reactions taking place with all the parts inside that are needed to heat up the water. We will not get overly technical right here, however it is simple to help avoid this from happening by doing a flush or draining of all or some of the water in the storage tank.

For simply a tiny flush, place a container under the drain valve below the tank. Open the drain valve and fill the container with water. Drain at least a few gallons of water in all. Let the water sit in the bucket for a couple of minutes to settle and examine if there is much that settles to the bottom of the pail. If there is, if the water heater has not been drained for a long period of time (or ever), it would be best to do a full flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature dial down and might want to let the water cool down for about an hour initially so it is not too hot while draining it. Likewise, it would be simpler to connect a hose to the drain valve and let the water go outside instead of using buckets.

If the water looks fairly clean and clear from the tiny test you should be all set. When the water heater has a large quantity of sediment inside of it, it can make loud popping noises and it lowers its efficiency too.

Though water heaters are fairly upkeep free and simple to run, any time you feel the smallest uncomfortable or are unsure of exactly what to do, it is always best to have a plumbing expert aid with the situation.

 Water Heater Repair Cary NC